How to use a dump station
Updated
This is general practice for a typical RV sewer hookup. The station’s own rules win. If a listing on this site says Unknown for a fee, for hours, or for potable water, treat that as unconfirmed and read the source or call.
Before you arrive
- Disposable gloves.
- A sewer hose and a clear elbow that stays in the inlet.
- A second hose used only for drinking water, if you plan to fill the fresh tank.
- The listing, so you know the address and which facts are unconfirmed.
At the station
- Pull in so the hose runs downhill toward the inlet. Set the brake.
- Check the cap. The sewer inlet is not a water spigot.
- Put on gloves. Connect the hose to the RV and keep the other end in the inlet.
- Open the black-tank valve and let it empty. Close it.
- Open the gray-tank valve. Gray water rinses the hose. Close it.
- If the station has a non-potable rinse, use it on the hose and the inlet area. Do not put rinse water in the fresh tank.
- Disconnect, cap the inlet, and stow the sewer hose away from anything you drink from.
- Wash your hands.
Potable water
Fill the fresh tank only when the listing says potable water is Yes, and only from the spigot the site marks for drinking water. Use the drinking-water hose, not the sewer hose and not the rinse hose. If the field says No or Unknown, do not fill the fresh tank there.
Courtesy
Do not leave the black-tank valve open while you are parked. Do not dump on the ground. If a fee is listed, pay it. If the fee says Unknown, ask before you assume the stop is free. A station marked for overnight guests is not public just because it appears in this directory. Read the access line on the listing.
This page is not a listing. It does not claim that any station is open, free, or stocked with water.